What Are the Best Thermostat Settings for Summer and Winter?

For comfort and efficiency in Maryland, set your thermostat to about 78F in summer and about 68F in winter when you are home, then add setbacks when you are away or asleep. Heat pumps need smaller adjustments. For tuning help, call Shemtov Systems at 240-355-3333.

Key takeaways

  • Aim for about 78F in summer and about 68F in winter while you are home and awake.
  • Setting back 7F to 10F for 8 hours a day can cut heating and cooling costs noticeably.
  • Use the away and sleep periods for setbacks; you rarely notice the change while out or under the covers.
  • Heat pumps perform best with small, steady adjustments because big jumps trigger costly auxiliary heat.
  • Smart and programmable thermostats automate setbacks, so savings happen without daily fiddling.

What Is the Best Summer Thermostat Setting?

About 78F is the sweet spot for cooling when you are home and awake. The smaller the gap between the indoor and the hot, humid Maryland outdoor air, the less your air conditioner runs. Each degree you raise the setting trims runtime and energy use, so nudging from 72F to 78F can make a real difference on a Montgomery County July afternoon.

What Is the Best Winter Thermostat Setting?

About 68F is recommended for heating when you are home and awake. During a cold Maryland winter, every degree lower means your system works less to fight the outdoor chill. Wearing a sweater and dropping the setting a degree or two adds to your savings without sacrificing real comfort.

How Much Can Setbacks Save You?

Turning the thermostat back 7F to 10F from its normal setting for about 8 hours a day can lower your annual heating and cooling bills by roughly 10 percent. The biggest savings come in extreme weather, which Maryland sees in both its humid summers and cold winters. Use overnight and away periods, since you barely notice the temperature change while asleep or out of the house.

Should You Use a Smart or Programmable Thermostat?

A programmable or smart thermostat handles setbacks automatically, so you capture the savings without remembering to adjust the dial. Smart models learn your routine, respond to your phone, and report energy usage. For most Montgomery County homes, automated scheduling is the easiest way to stay both comfortable and efficient year round.

How Are Thermostat Settings Different for a Heat Pump?

Heat pumps reward small, steady adjustments rather than deep setbacks. When you raise the temperature several degrees at once in winter, the system often switches on electric auxiliary heat, which is far more expensive to run. Keep one comfortable setting or use a thermostat designed for heat pumps that ramps gradually and limits aux heat use.

How to Set Your Thermostat for Efficiency

  1. Pick your home base temperatures: Choose about 78F for summer cooling and about 68F for winter heating while you are home and awake. These targets balance comfort with Maryland's seasonal demands.
  2. Schedule away setbacks: Program the thermostat to drift 7F to 10F toward the outdoor temperature during the hours nobody is home. In summer let it rise, and in winter let it fall.
  3. Add overnight adjustments: Set a sleep period that cools less in summer and heats less in winter. Most people sleep comfortably with a slightly cooler winter bedroom and a warmer summer one.
  4. Adjust gently if you have a heat pump: Limit changes to a few degrees at a time so the system avoids triggering auxiliary heat. Use a heat-pump-friendly thermostat that recovers temperature gradually.
  5. Automate and review: Let a programmable or smart thermostat run the schedule, then check the energy reports each season. Fine-tune the setpoints if a room feels off or bills look high.

Frequently Asked Questions

Is it cheaper to leave the thermostat at one temperature all day?

No. Holding a steady temperature uses more energy than allowing setbacks while you are away or asleep. A standard furnace or air conditioner does not work harder to recover from a setback than it saves during the setback period. Heat pumps are the main exception and prefer smaller, gradual changes.

What temperature should I use when I am away on vacation?

In summer you can let the home rise to around 85F, and in winter let it fall to about 55F to 60F. These wider setbacks save energy while still protecting the house from heat, humidity, and frozen pipes. Avoid turning the system off completely during Maryland’s most extreme weather.

Why does my heat pump blow cooler air in winter?

Heat pumps deliver heat at a lower air temperature than a gas furnace, so the air can feel mild even when the system works correctly. This is normal and efficient. If you force a large temperature jump, the unit kicks on auxiliary heat, which costs more, so steady settings are best.

Can Shemtov Systems help me choose and set up a thermostat?

Yes. Our NATE-certified technicians can recommend the right programmable or smart thermostat for your system, including heat-pump-compatible models, and program efficient schedules for your home. We serve Montgomery County and the Washington DC metro area; call 240-355-3333 to schedule service.

Need HVAC Help in Montgomery County?

Call Shemtov Systems at 240-355-3333 for trusted heating and cooling service across Montgomery County and the Washington DC metro. Family-owned since 1981.